CAB EOS5 Servicehandleiding - Pagina 11

Blader online of download pdf Servicehandleiding voor {categorie_naam} CAB EOS5. CAB EOS5 20 pagina's.
Ook voor CAB EOS5: Gebruikershandleiding (15 pagina's)

Pagina afdrukken
CAB EOS5 Servicehandleiding
2
Replacing Assembly Units
2.6

Replacing the Transport Module

1
2
3
4
Fig. 6
Removing / mounting transport module 1
Removing
 Remove the tear-off plate/cutter.
 Remove the casing.
 Unplug the connector (1) of the label sensor (2).
 Move the label sensor as far as possible to the operator's side  Operator's Manual.
 Remove screw (3) and 5 screws (4).
5
2
6
7
8
Fig. 7
Removing / mounting transport module 2
 Remove control panel.
 Remove the transport module (7) with the printing roller (6) by tilting from the chassis (5).
 Pull the cutter connection cable (8) downward out of the transport module (7).
Mounting
 Mount the assembly units in reverse order.
11