Actuonix P16-SS-GG-VV-P Handleiding voor gebruikersconfiguratie - Pagina 2

Blader online of download pdf Handleiding voor gebruikersconfiguratie voor {categorie_naam} Actuonix P16-SS-GG-VV-P. Actuonix P16-SS-GG-VV-P 9 pagina's. Usb control and configuration of the linear actuator control board

Pagina afdrukken

Manual Quick Start:

The LAC board is static sensitive. Ensure your work area is

static safe prior to removing the board from the static bag or

optional housing.

With all power and USB cables disconnected, connect an actuator to either the screw

terminal header or the Actuonix connectors as described in the datasheet.

PQ12–P : Copper faces contacts

L12–P and L16-P

Other –P : Wire colours may differ

Connect the external potentiometer, control signal, or RC connector.

External Pot : Wiper wire to VC

Signal : Connect RC, IC, or VC

RC Receiver : Standard Connector

If connecting a signal to RC, IC, or VC, make sure the signal ground is connected to the

power supply ground (-).