Cisco Small Business SRP520-U Snelstarthandleiding - Pagina 9

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco Small Business SRP520-U. Cisco Small Business SRP520-U 17 pagina's. Srp500 series services ready platforms

Pagina afdrukken

Placement Tips

Make sure that you install the SRP in a location that meets these

environmental conditions:

• Storage Temperature (sea level) -22° F to 140° F (-30° C to +60° C)

• Operating Temperature (sea level) 32° F to 104° F (0° C to 40° C)

• Relative Humidity (sea level) 5 to 95% RH (non-condensing)

Do not stack or place anything on top of the SRP, or install it on

AUTION

a hot surface.

Desk Placement

To mount the SRP on a desktop, place the device on a flat surface so it sits

on its four rubber feet.

Wall Mounting

When mounting the SRP horizontally, position it so that the back panel

faces upward. This reduces strain on the cable connections. When

mounting it vertically, position the SRP so the USB ports face downward.

Secure two number-six pan-head tapping screws, 3/4-inch (19 mm)

TEP

in length, 150 mm apart into a wall for horizontal orientation or

108 mm for vertical orientation, with the space between the

underside of each screw head and the surface of the wall equal to

5/32 inch (4mm).

For drywall installation, secure the screws by using two

AUTION

hollow-wall anchors (1/8 inch with 5/16-inch drill bit, or M3

with 8-mm drill bit). Without proper anchoring, the strain of

the network cable connections could pull the SRP from

the wall.

Locate the mounting screw slots on the bottom of the SRP, and

TEP

then hang it on the screws.

Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)