Cisco SOHO 96 Release-opmerkingen - Pagina 3

Blader online of download pdf Release-opmerkingen voor {categorie_naam} Cisco SOHO 96. Cisco SOHO 96 15 pagina's. Secure broadband routers
Ook voor Cisco SOHO 96: Snelstarthandleiding (8 pagina's), Specificaties (9 pagina's)

Pagina afdrukken
Cisco SOHO 96 Release-opmerkingen
厂牌名称 : Cisco
产品名称 : ADSL 调制解调器
型号 : SOHO 97
输出电源 : DC 18V/800Ma
制造厂 : 国 碁 电子 ( 中山 ) 有限公司
产地 : 中国
警语 : 注意不可以插错电源 , 使用网络线与计算器连系
厂牌名称 : Cisco
产品名称 : ADSL 调制解调器
型号 : 837
输出电源 : DC 18V/800Ma
制造厂 : 国 碁 电子 ( 中山 ) 有限公司
产地 : 中国
警语 : 注意不可以插错电源 , 使用网络线与计算器连系

Warning Message

Two of the warning messages listed in the Cisco 836 Router and SOHO 96 Router Hardware Installation
Guide and the Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series
Routers do not exactly match to the router's specification. They should be removed from the warning list.
The first warning message is as follows:
This equipment contains a ring signal generator (ringer), which is a source of hazardous voltage. Do
Warning
not touch the RJ-11 (phone) port wires (conductors), the conductors of a cable connected to the RJ-11
port, or the associated circuit-board when the ringer is active. The ringer is activated by an incoming
call.
It appears on page 2-3, Chapter 2 Installation of the Cisco 836 Router and SOHO 96 Router Hardware
Installation Guide and page 16 of the Regulatory Compliance and Safety Information for Cisco 800
Series and SOHO Series Routers. The warning message is not necessary because the Cisco 836 router
and SOHO 96 router do not have a ring signal generator embedded.
The second warning message is as follows:
Warning
Network hazardous voltages are present in the ISDN cable. If you detach the ISDN cable, detach the
end away from the router first to avoid possible electric shock. Network hazardous voltages also are
present on the system card in the area of the ISDN port (RJ-45 connector), regardless of when power
is turned off (by pressing power switch to standby).
78-15225-03
Release Notes for the Cisco 831, 836 and 837 Routers and SOHO 91, 96 and 97 Routers
Warning Message
3