Cisco SPS208G Gegevensblad - Pagina 2
Blader online of download pdf Gegevensblad voor {categorie_naam} Cisco SPS208G. Cisco SPS208G 5 pagina's. 8-port 10/100 + 2-port gigabit sp switch
Pagina afdrukken
groups, or applications. The SPS switches also secure management traffic, with support for Secure Shell (SSH)
Protocol, SSL, and Simple Network Management Protocol (SNMP) version 3.
The management capabilities of the SPS switches include support for DHCP option 82, allowing for assignment of IP
addresses to subscribers based on where they connect to the network. Management can be performed through a
GUI or command-line interface (CLI). The switches also support SNMP for management from a network
management station.
Features
Eight 10/100 switched RJ-45 ports that deliver up to 200 Mbps of throughput per port
●
One 10/100/1000 switched RJ-45 port
●
One mini Gigabit Interface Converter (mini-GBIC) port delivering up to 1000 Mbps
●
5.6 Gbps nonblocking, store-and-forward switching mechanism
●
Simplified quality of service (QoS) management enabled by advanced queuing techniques using 802.1p,
●
Differentiated Services (DiffServ), or type of service (ToS) traffic prioritization
Configuration and monitoring from a console port with the CLI or a standard web browser with WebView
●
management
Highly secure remote management of the switch via SSH and SSL secure channel network protocols
●
802.1Q-based VLANs, enabling segmentation of networks for improved performance and security
●
Stacking Q-in-Q VLANs, allowing customer VLANs to transparently cross a service provider network and
●
isolate traffic among customers
Private VLAN Edge (PVE) for simplified network isolation of guest connections or autonomous networks
●
Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol
●
(GVRP) and Generic Attribute Registration Protocol (GARP)
Automatic medium dependent interface (MDI) and MDI crossover (MDI-X) detection
●
Table 1 gives the specifications, package contents, and minimum requirements for the Cisco SPS208G switch.
Table 1.
Specifications
Ports
Cabling type
LEDs
Performance
Switching capacity
Forwarding rate
Layer 2
MAC table size
Number of VLANs
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Specifications for the Cisco SPS208G 8-Port 10/100 + 2-Port Gigabit SP Switch
● 8 RJ-45 connectors for 10BASE-T and 100BASE-TX, 1 RJ-45 connector for 10BASE-T/100BASE-TX/
1000BASE-T, and 1 mini-GBIC/SFP port
● Console port
● Auto MDI/MDI-X
● Auto-negotiate/manual setting
Unshielded twisted pair (UTP) category 5 (CAT5) or better for 10BASE-T/100BASE-TX, UTP CAT 5e or better for
1000BASE-T
10/100 Link/Act, Giga Link/Act, Speed, Mini-GBIC Link/Act, Speed, System
5.6 Gbps nonblocking
4.17 Mpps wire-speed performance
8000
256 active VLANs (4096 range)
Data Sheet
Page 2 of 5