Cisco WRP500 Snelstarthandleiding - Pagina 6

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco WRP500. Cisco WRP500 13 pagina's. Wireless-ac broadband router with 2 phone ports

Pagina afdrukken

1. Enable Remote Management

Connect and Configure the Cisco WRP500

Step 2

Step 3

Step 4

Connect and Configure the Cisco WRP500

Connect the Cisco WRP500

Step 1

Step 2

Note

Cisco WRP500 Wireless-AC Broadband Router with 2 Phone Ports Quick Start Guide

Drill two pilot holes into the surface 100 mm apart (about 3.94 in.). Take care to

ensure that the WRP500 will be level and secure in either of its two

safety-certified orientations.

Insert a screw into each hole, leaving a gap of 5.5 mm (0.217 in.) between the

underside of each screw head and the surface of the wall.

Place the unit wall-mount slots over the screws and slide the unit down until the

screws fit snugly into the wall-mount slots.

This section discusses how to enable Cisco WRP500 web access, by which the

user can configure the device through a web GUI.

Procedures assume that a user has these items:

Cisco WRP500 with factory default settings

•

PC with Ethernet network adapter

•

Connect a PC to one of the Cisco WRP500 LAN ports.

The PC receives an IP address that the Cisco WRP500 publishes by LAN.

Generally, the IP address is in 192.168.15.xxx format, and WRP500 IP address is

192.168.15.1.