CABAC HNS010RL Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CABAC HNS010RL. CABAC HNS010RL 4 pagina's.
Pagina afdrukken
4. OPERATION
The HNS010RL must be controlled by a compatible external switching device such as the Cabac 3-Wire
S-Click range products (HNS440TM, HNS450TM or HNS460SW) using the control inputs. The HNS010RL cannot be used as a standalone
switch. Either one of the control inputs must be connected to Neutral output and the other connected to the Load output of the HNS440TM,
HNS450TM or HNS460SW, see diagram below.
The wiring diagrams below show how to configure the HNS010RL for Normally Open (load normally OFF) and Normally Closed (load normally
ON) applications.
HNS440TM / HNS450TM /
HNS440TM / HNS450TM /
CAUTION: If the control input power is cut to the HNS010RL when the LOAD is wired in the Normally Closed
(N/C) configuration, the power to the LOAD will remain ON.
HNS460SW
HNS410TM
L
N
A
N/C
CONTROL
INPUTS
COM
N/O
HNS010RL
Figure 1: Normally Open Wiring Diagram (load normally OFF)
HNS460SW
HNS410TM
L
N
A
CONTROL
N/C
INPUTS
COM
N/O
HNS010RL
Figure 2: Normally Closed Wiring Diagram (load normally ON)
ACTIVE
NEUTRAL
LOAD
ACTIVE
NEUTRAL
LOAD