Epson V11H071920 - PowerLite 9300i SXGA+ LCD Projector Bedieningshandleiding - Pagina 30

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Epson V11H071920 - PowerLite 9300i SXGA+ LCD Projector. Epson V11H071920 - PowerLite 9300i SXGA+ LCD Projector 36 pagina's. Product support bulletin(s)
Ook voor Epson V11H071920 - PowerLite 9300i SXGA+ LCD Projector: Gebruikershandleiding (42 pagina's), Brochure & specificaties (2 pagina's), Bedieningshandleiding (47 pagina's), Snelle installatie (2 pagina's), Beknopte handleiding (20 pagina's), Product ondersteunings bulletin (28 pagina's)

Using the control functions

Procedures for new timer settings

When you click "Add", the following window is

displayed and the new timer settings are applied.

At "Operation", you can carry out the operations of turning the

power on and off and switching the input sources, similarly for

the control buttons on the main window. If you set the input

source switching, the projector's power will turn on at the timer

start time even if it is not on at the time. Because of this, it is not

necessary to make two separate timer settings for turning the

power on and switching the input source.

After completing the timer settings, click [OK].

The timer settings that have been made will be registered and

they can be checked in the displayed timer list.

TIP

You can enable and disable all of the timer settings that have been

registered. Select "Timer" - "Enable" or "Disable" from the "Tool"

menu.