Cisco 1130AG - Aironet - Wireless Access Point Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 1130AG - Aironet - Wireless Access Point. Cisco 1130AG - Aironet - Wireless Access Point 49 pagina's. Ieee 802.11a/b/g access point
Ook voor Cisco 1130AG - Aironet - Wireless Access Point: Gegevensblad (13 pagina's)
Pagina afdrukken
Radio and IP Address Configuration
The access point ships with its radio disabled.You must enable them when
you configure the access point for the first time. Also, the access point no
longer is assigned an IP address. It is configured to obtain an IP address using
a DHCP server. If your network does not use a DHCP server, you must
connect to the access point's console port and assign a static IP address (See
the "Assigning an IP Address Using the CLI" section on page 17.
How to Open the Top Cover
The top cover provides access to the cable and power connections.
Caution
Do not open the access point top cover as you would a hatch or
door. You could damage the cover by doing so. An instruction
label is attached to the access point. Take time to read the label
before you open the access point cover.
When you have familiarized yourself with the opening procedure, we
recommend that you remove the label, putting it in a safe place, such as inside
the cover of this guide.
2
78-15955-02