Cisco 1700 series Hardware installatiehandleiding - Pagina 41

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco 1700 series. Cisco 1700 series 46 pagina's. Secure firewall management center
Ook voor Cisco 1700 series: Handleiding voor naleving van regelgeving en veiligheidsinformatie (45 pagina's), Handmatig (15 pagina's), Configuratiehandleiding (25 pagina's), Toepassingsnotitie (41 pagina's), Problemen met hardware oplossen (12 pagina's), Overzicht handleiding (13 pagina's), configureren (34 pagina's), Handmatig (5 pagina's), Snelstarthandleiding (6 pagina's)

Installation, Maintenance, and Upgrade

Warning

Step 1

Remove the drive that you are replacing:

a) Press the release button on the face of the drive tray.

b) Grasp and open the ejector handle and then pull the drive tray out of the slot.

Figure 34: Remove the Drive

Ejector handle

Step 2

Remove the four drive-tray screws that secure the drive to the tray and then lift the drive out of the tray.

Statement 1090 Installation by Skilled Person

Only a skilled person should be allowed to install, replace, or service this equipment. See statement 1089

for the definition of a skilled person.

There are no serviceable parts inside. To avoid risk of electric shock, do not open.

Statement 1091 Installation by an Instructed Person

Only an instructed person or skilled person should be allowed to install, replace, or service this equipment.

See statement 1089 for the definition of an instructed or skilled person.

There are no serviceable parts inside. To avoid risk of electric shock, do not open.

Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide

Release button

Remove and Replace a Drive