Epson V11H179020 - PowerLite S3 SVGA LCD Projector Productinformatie - Pagina 6
Blader online of download pdf Productinformatie voor {categorie_naam} Epson V11H179020 - PowerLite S3 SVGA LCD Projector. Epson V11H179020 - PowerLite S3 SVGA LCD Projector 15 pagina's. Supplemental / late breaking information
Ook voor Epson V11H179020 - PowerLite S3 SVGA LCD Projector: Specificaties (2 pagina's), Installatiehandleiding (19 pagina's), Handleiding voor snelle installatie (7 pagina's), Specificaties (1 pagina's)
Pagina afdrukken
Epson PowerLite S3 Projector
If you're using a Macintosh notebook with
Mac OS 9.x or earlier:
1. From the Apple menu, select
.
Monitors and Sound
2. Click the
icon, and then drag one monitor icon on
Arrange
top of the other.
Click here
Drag one monitor
icon on top of
the other
Note: If the
option isn't available, you may need to select
Arrange
one of the Simulscan resolution settings. Click the
then select a Simulscan resolution from the ones in the Resolution
box. (Allow a few seconds for the projector to sync up after making
the selection.)
Switching Between Picture Sources
You can connect the projector to multiple video sources
simultaneously. Then you use the buttons on the projector or
remote control to switch between them:
❏ Press the
Source Search
between computer or component video, S-video, and
composite video sources.
❏ On the remote control, press the
select a computer or component video source. Press the
/
button to select a composite or S-Video
Video
S-Video
source.
After you select a source, the screen goes dark for a moment
before the image appears. The name of the source appears
briefly on the screen.
6 - Epson PowerLite S3 Projector
, then click
Control Panels
icon and
Monitor
button on the projector to switch
button to
Computer
Adjusting the Image
The following sections describe how to adjust the image once it
is displayed.
Adjusting the Height of the Image
The projector should be as perpendicular to the screen as
possible. If the image is too low, you can raise it by extending
the projector's front foot.
1. Stand behind the projector. Press the foot release buttons
and lift the front of the projector. This unlocks the foot.
2. Once the image is positioned where you want it, release the
button to lock the foot in place.
3. If you need to straighten the image, rotate the foot in the
back of the projector to raise or lower the side.
If the image is no longer square after raising it, see page 7.
Focusing the Image
Rotate the focus ring to sharpen the image.
Note: If a computer image is still out of focus, you can increase
the clarity by pressing the
See page 8.
3/05
Foot release
button
Focus ring
button on the remote control.
Auto