Argal TMR 06.10 Handleiding gebruiken - Pagina 2

Blader online of download pdf Handleiding gebruiken voor {categorie_naam} Argal TMR 06.10. Argal TMR 06.10 20 pagina's.

Pagina afdrukken

DISASSEMBLING SEQUENCE

TOOLS

Spanner No 13

EXECUTION NOTES

facilitate

the

pump

operations, first disassembly the HYDRAULIC

PARTS from the MOTOR PARTS

unscrew the connections (POS.1)

warning! The disassembly operations of parts

magnetically connected involve great opposed

forces: keep the MOTOR PARTS fixed on

floor during the removing of the HYDRAULIC

PARTS.

HYDRAULIC PARTS

Pos. Ref. Part name

910.1 Connection volute casing/strainer

MANUALE D'USO ROUTE - rev. 2 - 10/01

WARNING

The interventions must be performed under supervision of qualified personnel.

Before starting remember:

cut off the power supply from the motor and disconnect the electrical wiring; pull the

wires out from the terminal box and isolate their extremities accordingly

close the suction and discharge valves; open the drain valve

use appropriate gloves, protective glosses and acid proof-clothing when

disconnecting and washing the pump

disconnect hydraulic connections: leave enough time for the residual liquid to exit the

pump casing and atmosferic air to fill the empty volume

wash the pump before starting maintenace operations

do not scatter the washing liquid in the environment

disassembling

before attempting to dismantle the pump ensure that its motor is disconnected and

that it may not be started accidentally

before the inspection, check that you have spare O-rings ready to hand for re-

installing at the end of operations

warning! Operations near the magnets attract the tools. Proceed with caution to

avoid damages.

DISASSEMBLING STEPS SEQUENCE

MOTOR PARTS

Fig. 2.A – disassembling steps sequence

For further details see paragraph 9.1 "Disassembling"

Q.ty

Disassembling steps sequence

•

Spare stock for

working years

pag. 2/15