Cisco AIR-AP1020 - 1000 Series Lightweight Access Point Snelstarthandleiding - Pagina 25

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco AIR-AP1020 - 1000 Series Lightweight Access Point. Cisco AIR-AP1020 - 1000 Series Lightweight Access Point 44 pagina's. Aironet 1000 series ieee 802.11a/b/g lightweight access points with external antennas

Pagina afdrukken
Installation and Configuration
Figure 8
Copy the MAC address(es) from the label(s) on the Cisco Aironet 1000 Series lightweight access
1.
point onto the corresponding location on the map. MAC addresses have the format 00xxxxxxxxxx.
Attach the ceiling-mount base to the bottom of the Cisco Aironet 1000 Series lightweight access
2.
point using the factory-supplied machine screws and washers.
Position the ceiling-mount base so its keyhole slots are partly on the drywall, sheet metal, or other
3.
screw heads installed in
If the screws do not securely hold the ceiling-mount base, remove the Cisco Aironet 1000 Series
Note
lightweight access point and adjust the screws until they hold the ceiling-mount base securely.
Attach the cables to the sides of the Cisco Aironet 1000 Series lightweight access point.
4.
When the Cisco Aironet 1000 Series lightweight access point is powered up and is associated with a
Note
Cisco Wireless LAN Controller (Green/Power and Yellow/802.11b/g and/or Yellow or Amber/802.11a
LEDs lit), the Cisco Aironet 1000 Series lightweight access point is broadcasting its beacon signal(s).
When this happens, complete the installation as quickly as possible to remove yourself from within 8 in.
(20 cm) of the Cisco Aironet 1000 Series lightweight access point to comply with FCC RF radiation
exposure guidelines.
Slide the ceiling-mount base onto the drywall, sheet metal, or other screw heads until it fits snugly
5.
in place.
You installed the access point. Repeat
Points"
AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide
78-17147-01
Attaching the Cisco Aironet 1000 Series Lightweight Access Point and Ceiling-Mount
Base
"Preparing Mounting
for each location, and then continue with
Mounting the Cisco Aironet 1000 Series Lightweight Access Points
Locations."
"Mounting the Cisco Aironet 1000 Series Lightweight Access
"Returning MAC
Information."
15