Cisco AIR-AP2802I-B-K9 Aan de slag handleiding - Pagina 24

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco AIR-AP2802I-B-K9. Cisco AIR-AP2802I-B-K9 50 pagina's.

Pagina afdrukken

Checking the Access Point LEDs

The location of the access point status LED is shown in

Regarding LED status colors, it is expected that there will be small variations in color intensity

Note

and hue from unit to unit. This is within the normal range of the LED manufacturer's

specifications and is not a defect.

The access point status LED indicates various conditions and are described in

Table 2

LED Status Indications

Message Type

Association status

Boot loader status

Boot loader error

Operating status

Access point operating

system errors

Miscellaneous Usage and Configuration Guidelines

Using the Mode Button

Using the Mode button (see

LED State

Green

Blue

Green

Blinking Green

Blinking Blue

Alternating between Green

and Red

Cycling through

Red-Off-Green-Off-Blue-Off

Cycling through

Blue-Red-Green-Off

Figure

3) you can:

Figure

Message Meaning

Normal operating condition, but no

wireless client associated

Normal operating condition, at least one

wireless client association

Executing boot loader

Boot loader signing verification failure

Software upgrade in progress

Discovery/join process in progress

Access point location command invoked

from controller web interface.

General warning; insufficient inline power

Table