Epson V11H746520 Snelle installatie - Pagina 2

Blader online of download pdf Snelle installatie voor {categorie_naam} Epson V11H746520. Epson V11H746520 4 pagina's.

Pagina afdrukken
Camera, USB device, or document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector's USB-A (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User's Guide for details.
Using the remote control
Install the batteries as shown (two AA batteries).
Turn projector on
and off
Access projector menus
Change presentation
slides (USB only)
Turn off projector
display and sound
For more information on using the remote control, see the online User's Guide.
Turn on your equipment
1
Turn on your computer or video source.
2
Make sure the power cord is connected and plugged into an
electrical outlet.
Status light
3
Press the
power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the
Choose which source
to display
Navigate projector
menus
Control projector
volume
Access the Home
screen
power button twice.
4
If you don't see an image, press the Source Search button on the
remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
5
If you need to focus the image, first slide the switch on the side of the
projector to open the air filter cover. Then raise or lower the focus lever
to sharpen the image.
6
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen, then press
a QR code, switch between projection sources, and quickly access various
adjustment options from this screen.
7
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press
. Select Language and press
. Press the Menu button to exit the menu system.
language and press
Wired network
configuration
Follow the steps here to configure your projector for your wired network
using the projector's menu system.
Note: To connect the projector to a wireless network, you need the optional
wireless LAN module. For more information about using the projector on a
network, see the online User's Guide.
1
Press the Menu button on the remote control, select the Network
menu, then press
.
2
Choose Network Configuration and press
3
Select the Wired LAN menu and press
4
Choose IP Settings and press
to select it. You can display
. Select your
.
.
. You see a screen like the following: