ACU 2001 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ACU 2001. ACU 2001 12 pagina's.

SETUP

Set the A-B-C Switch

The A-B-C switch is located inside the

battery compartment. It can be set to

A, B or C. However, you must select

the same letter choices for both the

sensor and the display unit in order

for the units to synchronize.

Install or Replace Batteries

AcuRite recommends high quality

alkaline or lithium batteries for the

best product performance. Heavy

duty or rechargeable batteries are

not recommended.

Install Batteries

2 AA batteries

The sensor requires lithium batteries

in low temperature conditions. Cold

temperatures can cause alkaline

batteries to function improperly. Use

lithium batteries in the sensor for

temperatures below -4ºF / -20ºC.

1. Slide off the battery compartment

cover. Take note of the A-B-C

switch setting inside the battery

compartment for display setup.

2. Insert 2 x AA batteries into the

battery compartment, as shown.

Follow the polarity (+/-) diagram

in the battery compartment.

3. Replace the battery cover.

A-B-C Switch

set to match

display unit

A B C