CABASSE XI SYSTEM - Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CABASSE XI SYSTEM -. CABASSE XI SYSTEM - 16 pagina's.
Pagina afdrukken
e n g l i s h
Thank you very much for choosing Cabasse speakers.
Please read carefully these instructions before setting up your speakers.
With the Xi SYSTEM
®
, Cabasse proposes a Hi Fi / audio video
system based on the Spatially Coherent Source (SCS) principles
coming from our high end ARTIS range of speakers.
With these 2-way speakers combined with a Xi active sub-
woofer, you can get a very high quality system, either in a 2.1
configuration (standard stereo) or in a 5.1 configuration (5
channels system) or 6.1 or 7.2...
UNPACKING
Open carton flaps; leave one by one all the components.
If the speakers or the subwoofer appear damaged, do not use
them. Repack everything in the original packing and contact
your authorized Cabasse dealer immediately. We suggest you
to retain the packing for future use.
SETTING UP
Handle with care
To avoid electric
the 35.5 lb (16 kg)
shock or fire
of the subwoofer.
hazards, do not
Use good lifting
expose speakers
practice to avoid
to rain or moisture.
injury.
The components of your system:
2, 3 or 5 Xi speakers
■
■
1 Xi active subwoofer including 1 MAX Cabasse and 2 CINCH
cables of 6 meters.
Xi column version
It is a floor standing version, the base of the Xi column has
"silent-blocks" for a perfect stability on all types of floor. Xi col-
umn must be assembled on its base trough 3 screws and an
allen key delivered in the pack 1 .
Xi bookshelf version
The Xi bookshelf version can be placed on a shelf or fixed on
a stand, a set of 2 stands for Xi bookshelf is sold separately. The
bookshelf version can be fixed on the Xi stand with 4 screws
delivered with the stands 2 .
Xi centre/on wall version
This version allows you:
to place your speaker horizontally on/under a television set
■
or on a shelf (centre way) thanks to the 2 "silent-block" pins
to be screwed on the back of the speakers 3 ,
to fix your speaker horizontally on to the wall (centre way),
■
thanks to 2 brackets included, these brackets are to be fixed on
the wall with 2 screws 4 ,
to fix your speaker vertically on the wall (main or surround
■
ways), thanks to 2 brackets included, these brackets are to be
fixed on the wall with 2 screws. In this case, it is necessary first
to unscrew the 2 female brackets located on the back of the
speakers, turn them 90° around, and screw up them back 5 .
Positionning of Xi SYSTEM
Xi speakers have all the same technical features; they can be used
on any channel. All the speakers are magnetically shielded to
prevent interference with the image of your television set; they
can thus be placed near any screen.
Front left and right speakers must be directed towards the lis-
tening area and placed on either side of the screen with at
To avoid danger
least a distance of 7 ft and 16 ft (2 and 5 m) between the 2
of suffocation keeps
the plastic bags that
speakers.
wrap these speakers
The centre satellite should be placed as close as possible to the
out of the reach
of children.
screen: on the top, below, or directly on your television set.
Place the satellite at the vertical of the screen for a perfect
cohesion and precision between dialogues and picture.
Surround speakers should be placed against the side walls, at
listening height or higher if possible and slightly behind the
listening area.
The subwoofer should be placed in the front listening area.
To get the best result, it is always necessary to carry out tests
according to the acoustics of the room. To prevent interference
with the screen of your television set, place the subwoofer at
least 2 ft (0,6m) of your television set.
®
6