DigitaLinx DL-HD70LSIR Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DigitaLinx DL-HD70LSIR. DigitaLinx DL-HD70LSIR 13 pagina's.
Ook voor DigitaLinx DL-HD70LSIR: Handleiding voor snelle installatie (8 pagina's)
Pagina afdrukken
HDBaseT Connection
Connect one end of a Category cable to the DL-HD70LSIR transmitter labeled TWISTED PAIR, then connect the
other end of the Category cable to the DL-HD70LSIR receiver labeled TWISTED PAIR
To ensure proper performance of the DL-HD70LSIR, it is recommended that you use solid core, shielded
Category 6 F/UTP cabling at a minimum. Category 5e F/UTP may perform well up to a certain length but may
not support power over HDBaseT reliably longer distances.
For optimized performance use the following Liberty Wire and Cable branded cabling;
Category 6 plenum; 24-4P-P-L6SH
Category 6A plenum; 24-4P-P-L6ASH
Category 6 NON-plenum; 24-4P-L6SH
Category 6A NON -plenum; 24-4P-L6ASH
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category 6
connection between send and receive
units.
When using shielded category cabling ALWAYS...
....use shielded connectors
....properly ground the category cable
DL-HD70LSIR Owners Manual
7