Cisco Aironet 1520 Series Handmatig - Pagina 10
Blader online of download pdf Handmatig voor {categorie_naam} Cisco Aironet 1520 Series. Cisco Aironet 1520 Series 27 pagina's. Outdoor mesh access point
Ook voor Cisco Aironet 1520 Series: Aan de slag handleiding (37 pagina's), Hardware installatiehandleiding (50 pagina's)
Pagina afdrukken
Layer 2 and Layer 3 Network Operation
The access points support Layer 2 or Layer 3 network operation. In Layer 2 configurations, the access
point and the controller are on the same subnet and communicate with encapsulated Ethernet frames
using MAC addresses rather than IP addresses. Layer 2 configurations are typically not scalable into
larger networks. Additionally, Layer 2 operation is supported only by the Cisco 4400 series controllers.
Access points and controllers in Layer 3 configurations use IP addresses and UDP packets, which can
be routed through large networks. Layer 3 operation is scalable and recommended by Cisco.
Figure 6 illustrates a typical Layer-3 wireless network configuration containing access points and a
controller.
Figure 6
Overview
10
Typical Layer 3 Access Point Network Configuration Example
LWAPP
LWAPP
OL-12632-01