DigitaLinx DL-SCU21C Handleiding voor snelle installatie - Pagina 6

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} DigitaLinx DL-SCU21C. DigitaLinx DL-SCU21C 8 pagina's.

DL-SCU21C Quick Guide

1. Verify all components included with the DL-SCU21C set are present before installation.

2. If the DL-SCU21C is going to be permanently mounted to a surface, attach the included mounting

brackets with the supplied screws.

3. Turn off power and disconnect the audio/video equipment by following the manufacturer's

instructions.

4. Connect an HDMI cable that is less to or equal to 5 meters in length between the display and the

HDMI output of the DL-SCU21C. For display devices that are further away, an HDMI extension device

will be required to complete the connection.

5. Connect a source device to the HDMI input using a HDMI cable that is less than or equal to 5

meters in length. For source devices that are further away, an HDMI extension device will be required

to complete the connection.

6. Connect a source device to the USB-C input using a USB-C video cable that is less than or equal to

2 meters in total length.

7. Connect RS232 control between the display to control connected display or connect to a 3rd party

control system to control switcher functions (optional)

NOTE: A list of RS232 commands for this unit is available in the owners manual online at

www.libav.com under the DOCUMENTATION tab of the DL-SCU21C product page

8. Set EDID mode on front panel of unit to desired EDID setting

9. Connect the included power supply to the DL-SCU21C and lock the power supply to the power

connector by twisting the locking collar clockwise.

10. Power on attached audio/video devices.

Connectivity Instructions