DigitaLinx DL-SE3H1V-C Handleiding voor snelle installatie - Pagina 4

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} DigitaLinx DL-SE3H1V-C. DigitaLinx DL-SE3H1V-C 8 pagina's.

LAN - RJ45 Telnet control port

FW UPDATE - USB port for receiver firmware updates

HDBT IN - HDBaseT input to connect to HDBaseT output on transmitter via category cable

• POWER - When solid, the transmitter is receiving power

• SCALER - When solid, the scaler module is working properly

• STATUS - When solid, the transmitter is working properly

• HDCP - When solid, HDCP content is being transmitted, when blinking NON HDCP content is

being transmitted

• LINK - When solid, the link between transmitter and receiver is normal. When blinking or off the

link between transmitter and receiver is lost and should be reset

HDMI IN - HDMI receiver input for local HDMI source

HDMI OUT - HDMI output for display connectivity

AUDIO OUT - Stereo analog audio output

• AUTO - Enables auto switcher. When LED is on the auto switch function is ON

• HDBT IN - HDBaseT / Transmitter input selector

• HDMI IN - Receiver HDMI input selector

LED indicator status for HDBT and HDMI input:

• When LED is violet, the input has signal and is selected

• When LED is orange, the input has signal but is not selected

• When LED is blue, the input has no signal but is selected

• When LED is off, the input has no signal and is not selected

RS232 - Serial control port for display control / 3rd party control

10. RELAY 1 / RELAY 2 - Relay port 1 and 2 for room peripheral control

11. SCALER UPDATE - USB port for scaler firmware updates

12. DC12V - DC12V - Locking power port to connect DC12V power adapter

Receiver View

11 12