DigitaLinx DL-UHDILC Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DigitaLinx DL-UHDILC. DigitaLinx DL-UHDILC 17 pagina's.
Ook voor DigitaLinx DL-UHDILC: Handleiding voor snelle installatie (5 pagina's)
Pagina afdrukkenDL-UHDILC Owners Manual
Enter the displays POWER ON and OFF/STANDBY command for the display device in the Power on and Power off
field. Serial commands for displays and projectors are provided by the display manufacturer and can be found in
the products instructional documentation.
By default, ASCII command type is used. If the command for display ON/OFF is only available in Hex coding, check
the HEX button next to the Power On command field and then enter the Hex command in the Power On and Power
Off field.
Click the Send buttons adjacent to both the Power On and Power off field to upload the commands. If upload is
successful a green light next to the Send button will illuminate and a pop up window will confirm a successful
upload.
If the display commands require a terminator, choose the appropriate terminator from the Set terminator section
and then click the Set button. If upload is successful a green light next to the Set button will illuminate and a pop
up window will confirm a successful upload.
Explanation of terminator menu:
\r = Carriage Return <CR>
\n = Line Feed <LF>
\r\n = Carriage Return + Line Feed <CR><LF>
none = No terminator required
14