Cabela's 04202107 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cabela's 04202107. Cabela's 04202107 12 pagina's. Manual meat tenderizer/cuber

Pagina afdrukken

1. Cleaning and Maintenance

STEP 7. INSERT BLADE CLEANING COMBS

NOTE: The blade cleaning combs include

an attached thumbscrew to allow for

correct placement into the left and right

side of the housing assembly.

STEP 9. TABLE MOUNTING WITH C-CLAMPS

Secure the base of the Tenderizer/Cuber to

a table or work surface with the two

C-clamps included. The Tenderizer/Cuber is

now ready to use!

CAUTION: It is recommended to wear steel mesh or Kevlar®

cut-resistant gloves when handling the blade assembly

STEP 7

STEP 8

STEP 8. ADD CRANK HANDLE TO

CRANKSHAFT and secure with the

locking nut by hand until snug.

(DO NOT force to tighten)

STEP 9

IMPORTANT NOTE:

Periodically the gears on the blade

assemblies may need to be tightened

using the small SMALL ALLEN WRENCH

included to tighten. Be sure to inspect

gears when assembling for the first time.