Cabela's Gun Dog GS-6001 Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cabela's Gun Dog GS-6001. Cabela's Gun Dog GS-6001 13 pagina's. Remote trainers
Ook voor Cabela's Gun Dog GS-6001: Snelstarthandleiding (13 pagina's)

Pagina afdrukken

400-1139-1.qxp:two column layout for print

Explaining the Transmitter Keypad

Buttons (continued)

Prog/Loc (GS-7001 only) – Pressing and

holding this dual-function button until the

PROG symbol appears in the display puts

the Transmitter in programming mode.

Briefly pressing this button starts or stops

Locate Mode (explained on page 10).

Locate (GS-6001 only) – Press this

button to start or stop Locate mode

(explained on page 10).

Transmitter Display Symbols:

The display stays on for 30 minutes after

a button press. After 30 minutes with no

button presses, the display shuts off.

Pressing any button will make the display

turn back on.

Various symbols you might see in the

Transmitter display are explained as

follows:

(Numeric readout) – Appears in

the middle of the display, this shows the

chosen stimulation level. Adjust with the

Stim level up / Stim level down (arrow)

buttons.

All manuals and user guides at all-guides.com

9/25/09

4:03 PM

Page 6

– The left symbol displays

when the Transmitter is controlling Dog

Collar Receiver 1. You can purchase a

second collar to expand the system for

training two dogs. The right symbol

displays when controlling Dog Collar

Receiver 2. Switch between Collar

Receivers by pressing the Dog Select

button. Both symbols display when in

Dual Dog mode. (See Set Dual Dog mode

on page 7.)

– This symbol appears whenever

Tone is part of the Stimulation type

chosen. (See Program the Stim Type on

page 7.)

GS-7001 ONLY:

– This symbol appears when

the Transmitter is in programming mode.

(See Programming Mode on page 7.)

– This symbol appears when

the Transmitter is in Locate mode.

– The battery indicator

provides constant awareness of your

battery's power level. (See Battery

Indicator on page 9.)

Backlight – The Transmitter features a

backlit display. The display backlight

stays on for 5 seconds after a button

press.

Cabela's

Gun Dog

— Owner's Manual

USING THE TRANSMITTER

Turning ON the Transmitter

Power up the Transmitter by pressing any

button. You will see the display turn on

when you press any button.

Reset All Programmable Settings

Press

and

at the same time to

reset all programmable settings to the

default settings. The Transmitter Display

shows all symbols for two seconds during

reset.

Transmitter Default Settings

GS-6001 Defaults

Dog 1&2 Primary Stim Level: 5

GS-7001 Defaults

Dog 1&2 Stim Type: Stim without Tone

Dog 1&2 Primary Stim Level: 7

Dog 1&2 Alt Stim Level: 14

Set Stim Button Intensity Level

To change the intensity level for the Stim

button:

Press

until the desired

stimulation level is displayed. When the

Stim button is pressed, the Receiver will

deliver a stimulation at this setting.

GS-7001 ONLY:

Programming Mode

To enter Programming Mode, press and

hold the Prog/Loc button until the PROG

symbol displays, then release the button.

The Transmitter is now in Programming

mode.

To exit Programming Mode, press and

release the Prog/Loc button again. The

PROG symbol no longer displays.

Cabela's

Gun Dog

— Owner's Manual

GS-7001 ONLY:

Program the Stim Type (Tone Option)

For GS-7001 Transmitters, stimulation

may be delivered with or without a tone.

The Transmitter's default setting is Stim

without Tone.

To choose:

1. Choose desired dog. Press

(Dog Select button).

2. Press the Prog/Loc button until the

PROG symbol shows in the Transmitter

display. Release Prog/Loc button.

3. Press and release TONE. If

you keep pressing the TONE

button,

the

selection

switches between these choices:

• Stim without Tone (

no Tone symbol

displayed)

• Stim with Tone (

Tone symbol displayed)

4. Press and release the Prog/Loc

button to save setting and exit.

For additional information regarding using

the Tone, see Training Tone Option on

page 14.

GS-7001 ONLY:

Set Dual Dog mode

In Dual Dog mode, the continuous

stimulation button (red) controls Dog 1

Collar Receiver, and the Momentary

Stimulation button (gray) controls Dog 2

Collar Receiver. You control two dogs

without using the Dog Select button to

switch between dogs. In this mode, Stim

type is stim without tone.