ARGENTO Piuma Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ARGENTO Piuma. ARGENTO Piuma 20 pagina's. Electric pedal-assisted cycle

- Avoid uneven surfaces and obstacles.

- Drive with both hands on the handlebar.

- Replace worn and / or damaged parts, check that the protections are working

properly before use.

2.4 Maintenance warnings

All maintenance operations must take place with the battery disconnected.

During each maintenance phase, operators must be equipped with the necessary

accident prevention equipment.

The tools used for maintenance must be suitable and of good quality.

Do not use gasoline or flammable solvents as detergents, but always use non-

flammable and non-toxic solvents.

Limit the use of compressed air as much as possible (max 2 bar) and protect

yourself with glasses with side shields.

Never resort to the use of open flames as a means of lighting when carrying out

verification or maintenance operations.

After any maintenance or adjustment, make sure that no tools or foreign bodies

remain between the moving parts of the pedal-assisted bicycle.

Use only original ARGENTO spare parts.

Any liability of the manufacturer for damage or loss of functionality caused

as a result of using non-original accessories and parts is excluded.

The first thing to do when starting to use is to check the presence and integrity of

the protections and the functioning of the safety devices.

If you find any defect, do not use the pedal-assisted bicycle!

It is strictly forbidden, therefore, to modify or remove the guards of the

battery, the chain, etc. warning and identification plates.

In the event that the pedal-assisted bicycle should be stored and kept for long

periods of inactivity, the following operations must be carried out:

- Repair it in a dry and ventilated place.

- Carry out a general cleaning of the pedal-assisted bicycle.

- Remove the battery from its seat and turn the key to OFF.

- Leave the bicycle on the stand.

- Protect exposed electrical contacts with antioxidant products.

- Grease all surfaces not protected by paints or anti-corrosion treatments.

Original spare parts

Repairs