Epson 4000 - Stylus Pro Color Inkjet Printer Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 16 pagina's. Print engine
Ook voor Epson 4000 - Stylus Pro Color Inkjet Printer: Brochure & specificaties (4 pagina's), Handleiding voor productreferenties (38 pagina's), Productinformatie (13 pagina's), Start hier Handleiding (6 pagina's), Product ondersteunings bulletin (17 pagina's), Belangrijke informatie (2 pagina's), Beperkte garantie (12 pagina's), Snelle referentiehandleiding (11 pagina's), Brochure & specificaties (12 pagina's), Brochure & specificaties (6 pagina's)

Attaching the spindle to the printer

To attach the paper loaded spindle to the printer,

follow these steps.

1. Open the roll paper cover.

2. Raise the roll paper support.

3. Make sure that the movable flange is fixed into

the end of the roll paper properly.

4. Hold the roll paper spindle so that the black

movable flange is on the left side. Then place

the spindle on the groove on top of the printer

once.

5. Move the paper lever to the released position.

6. Hold the both sides of the paper, and load the

paper into the paper insertion slot.

7. Pull the paper until it hangs down over the

paper tray.

Note:

If you load thin paper, press the Paper Feed

button to decrease the value of paper suction. If you

load thick and curled paper, press the Paper Feed

button to increase the value of paper suction.