Epson 4880 - Stylus Pro Color Inkjet Printer Netwerkhandleiding - Pagina 11

Blader online of download pdf Netwerkhandleiding voor {categorie_naam} Epson 4880 - Stylus Pro Color Inkjet Printer. Epson 4880 - Stylus Pro Color Inkjet Printer 46 pagina's. Ink fill for the refillable cartridge system
Ook voor Epson 4880 - Stylus Pro Color Inkjet Printer: Beknopte installatiehandleiding (1 pagina's), Installatiehandleiding (4 pagina's), Handleiding productinformatie (16 pagina's), Beperkte garantie (12 pagina's), Gebruiksaanwijzing (5 pagina's)

Installing Network Components on Your Computer

Before configuring the network interface and printing from the computer, you need to

install the necessary components (such as TCP/IP) and assign an IP address and subnet

mask for your computer, depending on the printing method you want to use. See the

section in this chapter appropriate for your operating system.

For Windows Vista, use the following procedure to install the necessary components.

1. Click Start, click Control Panel, and then click View network status and tasks or

double-click Network and Sharing Center.

2. Click View Status, and then click the Properties button.

Note:

If the User Account Control screen appears, click the Continue button.

3. Check if the following necessary components are in the list.

The following table lists the components required for configuring the network

interface with EpsonNet Config.

EpsonNet Config's setting screens

TCP/IP, IPP, SNMP (IP trap)

MS Network

Necessary components

Internet Protocol (TCP/IP)

Setting Up Your System for Network Printing