Cisco Meraki MR76 Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco Meraki MR76. Cisco Meraki MR76 27 pagina's.

Pagina afdrukken

Static Assignment

Static IPs are assigned using the local web server on each AP. The following procedure describes how to set the static IP:

1. Using a client machine (e.g., a laptop), connect to the AP wirelessly (by associating to any SSID broadcast

by the AP) or over a wired connection.

2. If using a wired connection, connect the client machine to the MR76 either through a PoE switch or a PoE

Injector. If using a PoE switch, plug an Ethernet cable into the MR76's Ethernet jack, and the other end into

a PoE switch. Then connect the client machine over Ethernet cable to the PoE switch. If using a PoE

Injector, connect the MR76 to the "PoE" port of the Injector, and the client machine to the "LAN" port.

3. Using a web browser on the client machine, access the AP's built-in web server by browsing

to http://my.meraki.com. Alternatively, browse to http://10.128.128.128.

4. Click on the "Uplink Conﬁguration" tab. Log in. The default login is the serial number (e.g. Qxxx-xxxx-xxxx),

with no password (e.g., Q2DD-551C-ZYW3).

5. Conﬁgure the static IP address, net mask, gateway IP address and DNS servers that this AP will use on its

wired connection.

6. If necessary, reconnect the AP to the LAN.

Static IP via DHCP Reservations

Instead of associating to each Meraki AP individually to conﬁgure static IP addresses, an administrator can assign static IP addresses on the upstream

DHCP server. Through "DHCP reservations," IP addresses are "reserved" for the MAC addresses of the Meraki APs. Please consult the documentation

for the DHCP server to conﬁgure DHCP reservations.

Collect Tools

You will need the following tools to perform an installation: