Epson C11CB88201 Beknopte handleiding - Pagina 25

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Epson C11CB88201. Epson C11CB88201 44 pagina's. Epson workforce 545: quick start

Pagina afdrukken

Cleaning the Print Head

If print quality has declined and the nozzle check indicates clogged nozzles, you can clean

the print head. Print head cleaning uses ink, so clean it only if necessary.

Note: You cannot clean the print head if an ink cartridge is expended, and may not be

able to clean it when a cartridge is low. You must replace the cartridge first (see

page 27).

Load letter- or A4-size paper.

Press

F Setup

Press u or d to select

Choose the colors you want to clean.

Tip: Use the nozzle check pattern to determine which

colors need cleaning. You can save ink by cleaning only

selected colors.

Cleaning takes a few minutes. When it's finished, you see a

message on the LCD screen.

Caution: Never turn off the product during head cleaning

or you may damage it.

Press

to run a nozzle check and confirm that the print head is clean.

Note: If you don't see any improvement after cleaning the print head four times, leave

the product on and wait at least six hours to let any dried ink soften. Then try cleaning

the print head again. If quality does not improve, one of the ink cartridges may need to

be replaced. If that doesn't help, contact Epson as described on page 34.

If you do not use your product often, it is a good idea to print a few pages at least once

a month to maintain good print quality.

, then press

Maintenance

, press

Head Cleaning

, then press

again.

Maintaining Your Product