CABINETS TO GO Findley & Myers BC15 Montage-instructies - Pagina 4
Blader online of download pdf Montage-instructies voor {categorie_naam} CABINETS TO GO Findley & Myers BC15. CABINETS TO GO Findley & Myers BC15 5 pagina's. Base cabinets
Ook voor CABINETS TO GO Findley & Myers BC15: Montagehandleiding (9 pagina's)
Pagina afdrukken
6.
Install the D rawer Slide R ails: Insert the drawer side rail's back end (h) into the
holder (g) previously installed (Step 4) on the back panel (D) (Figure 8).
Then secure the drawer rail front end with 1/2" screws (e) using the pre‐drilled holes in the
face frame (A). The remainder of the screws can be used to secure the drawer to the rails.
h
e
2 - 1 Set
8
Qty
Qty
7.
Drawer Assembly (Figure 9): First
(H) with screws (f). Then assemble the rest parts of drawer box (H) using your palm, or a rubber
mallet if needed, to secure the dove tails into position.
f
t
5
Q
y 3-
Figure 9
8.
Installing the Corner Braces (Figure 10) and inserting the Drawer: Place the corner
braces (b) on each top corner of the cabinet and secure them with the ½" Corner Brace Screws (c).
Slide the drawer into the rails and check the drawer position. Install the rubber bumpers (a) onto
the corners of the door and drawer front (G) where they contact the frame.
b
c
Q ty
4
8
Qty
a
8
Qty
D
B
F
Figure 8
assemble the drawer front (G) with drawer box front
G
Figure 10
h
H
b
Page 4
Top
g