Cisco WAP371 Snelstarthandleiding - Pagina 7
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco WAP371. Cisco WAP371 15 pagina's. Reboot and reset to factory default settings
Ook voor Cisco WAP371: Snelstarthandleiding (38 pagina's), Handmatig (5 pagina's), Handmatig (4 pagina's)
Pagina afdrukken
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Off
Power
Solid (Green)
Solid (Amber)
Flashing (Green
or Amber)
Solid (Red)
WLAN
Off
Solid
Green
Amber
Blue
Flashing
Off
LAN
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
Cisco WAP371 Wireless Access Point
Description
The WAP371 is out of power.
The Cisco WAP371 is powered on, booting, or
in normal operation with PoE.
The Cisco WAP371 is powered on, booting, or
in normal operation with External Power
Adapter
The Cisco WAP371 is upgrading the firmware,
or is acquiring an IPv4 or IPv6 address.
The Cisco WAP371 fails to boot with both
firmware images.
Wireless is disabled, for both 2.4 GHz and 5
GHz.
Wireless is enabled.
Concurrent mode enabled.
5 GHz is in use.
2.4 GHz is in use.
The WAP371 is transmitting or receiving data.
No Ethernet link.
GE Ethernet link is active.
FE Ethernet link is active.
The WAP 371 is transmitting or receiving data.
6