Cisco WAP571E Snelstarthandleiding - Pagina 10
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco WAP571E. Cisco WAP571E 17 pagina's. Manually connect access points to the network via power over ethernet (poe)
Ook voor Cisco WAP571E: Handmatig (4 pagina's), Snelstarthandleiding (6 pagina's)
Pagina afdrukken
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Power
Off
Solid (Green)
Solid (Blue)
Flashing (Blue)
Solid (Red)
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
9
Description
The WAP571E is out of power.
The Cisco WAP571E is normal; no wireless
client connected.
The Cisco WAP571E is normal; at least one
wireless client connected.
The Cisco WAP571E is upgrading the
firmware.
The Cisco WAP571E fails to boot with both
firmware images.
Cisco WAP571E Wireless Access Point