Epson CX6600 - Stylus Photo Printer Beknopte handleiding - Pagina 31

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Epson CX6600 - Stylus Photo Printer. Epson CX6600 - Stylus Photo Printer 47 pagina's. Epson scan icm updater v1.20 (psb.2008.07.001)
Ook voor Epson CX6600 - Stylus Photo Printer: Start hier Handleiding (8 pagina's), Informatie handleiding (4 pagina's), Beknopte handleiding (48 pagina's), Start hier Handleiding (8 pagina's), Handmatig (14 pagina's), Handleiding bijwerken (2 pagina's), Installatiehandleiding (2 pagina's), Update (1 pagina's), Bedieningshandleiding (50 pagina's)

Maintaining

Your CX6600

If you notice a decline in print quality, follow the instructions

in this chapter to

check and clean the print head. You'll also find instructions

on checking ink levels

and replacing the ink cartridges.

See these sections:

•

"Cleaning

the Print Head" below

•

"Replacing Ink Cartridges"

on page 33

Cleaning the Print Head

If your printouts are unexpectedly

light or faint, or you notice light or dark bands

across your printout,

you may need to clean the print head. This unclogs the

nozzles so they can deliver ink properly.

Note:

Print head cleaning uses ink,so clean it only if quality declines.

If you notice that text or straight vertical lines appear jagged, you may need to align the

print head. See your on-screen Reference Guide for details.

Running

a Nozzle

Check

Make sure the CX6600

is turned on, paper is loaded, and the red ! error light

is off. (If the ! error light is on, check the LCD screen to see if you have to

replace an ink cartridge.)

Press the Setup

button to enter Setup Mode.

Press the green button next to the LCD screen until you see Nozzle check

displayed, then press the 4> Color button to print the nozzle check.