Epson CX9400Fax - Stylus Color Inkjet Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} Epson CX9400Fax - Stylus Color Inkjet. Epson CX9400Fax - Stylus Color Inkjet 17 pagina's. Supplemental / late breaking information
Ook voor Epson CX9400Fax - Stylus Color Inkjet: Start hier Handleiding (24 pagina's), Start hier Handleiding (8 pagina's), Specificaties (2 pagina's), Beknopte handleiding (48 pagina's), Start hier Handleiding (9 pagina's), Update (1 pagina's), Supplement (1 pagina's)

Epson CX9400Fax - Stylus Color Inkjet Handmatig
Epson Stylus CX9400Fax Series
4. Press
and then select
Note:
If the recipient's fax machine prints only in black and white, your
fax is automatically sent in black and white even if you selected
color.
5. Press
, if necessary, to adjust any of the following
Menu
settings:
to increase the scanning resolution of a
Resolution
faxed document
to change the contrast of the faxed document
Contrast
to specify a different time to send your fax.
Fax Delay
(You cannot send another fax until the delayed fax has
been sent or cancelled.)
to select
Fax Mode
another fax machine to which you have dialed (such as a
fax information service). Change the setting back to
when you're finished.
Sending
Press
when you're done selecting settings.
OK
6. Press
, if desired, to see a summary of your fax
OK
transmission settings.
7. Press x
to send your fax. (To cancel faxing, press
Start
y
Stop/Clear Settings
After your original(s) are scanned, you see this screen:
8. If you need to fax additional pages, press
original(s) on the scanner glass or in the Automatic
Document Feeder, then press
If you do not need to fax another page, press
printer dials the fax number and faxes your document.
Note:
If the fax number is busy, you see a redialing message and the
CX9400Fax Series redials after one minute. To redial
immediately, press Redial/Pause.
10
or
.
Color
B&W
mode to receive a fax from
Polling
.)
. Place your
OK
to continue.
OK
. The
Back

Receiving Faxes

Before receiving faxes, make sure you load plain paper and
select the
Paper Size
you've loaded. If the incoming fax pages are larger than the
paper size you loaded, the fax size is reduced to fit or printed
on multiple pages, depending on the
setting you select.
If you run out of paper during printing, you see the error
message
. Load more paper and press the x
Paper out
button to continue.
To receive faxes automatically, make sure the
light is turned on. To turn it on, press the
button.
Answer/Space
To receive faxes manually, turn off the
and follow these steps:
1. When your telephone rings, lift the phone off the hook.
You see this screen:
2. Press r to select
Receive
3. If you want to receive the fax, press the x
4. After all the pages are received, you see the screen shown
above. Replace the phone on the hook.
8/07
setting that matches the size of paper
Automatic Reduction
Auto Answer
Auto
Auto Answer light
Auto Answer
, then press
.
OK
Start
Start
light
button.