Cisco 3515 MCU12 Installatie- en upgradehandleiding - Pagina 26
Blader online of download pdf Installatie- en upgradehandleiding voor {categorie_naam} Cisco 3515 MCU12. Cisco 3515 MCU12 44 pagina's. Cisco unified videoconferencing releases 5.6 and 5.7
Pagina afdrukken
Accessing the Cisco Unified Videoconferencing 3515 MCU Administrator Interface
You can use your web browser from any remote PC station to monitor and to configure the Cisco Unified
Videoconferencing 3515 MCU unit. A web server is installed in the Cisco Unified
Videoconferencing 3515 MCU unit to facilitate the use of the remote web-based monitoring and
management.
Access to the Cisco Unified Videoconferencing 3515 MCU configuration interface is controlled by a
user name and a password. Once you have entered the settings you want, you should upload them to the
unit for them to take effect, or you can save them to a configuration file to be loaded at a later time.
Before You Begin
These are the requirements for accessing the Cisco Unified Videoconferencing 3515 MCU
Administrator web interface:
A Java-compliant browser. Microsoft Internet Explorer version 5.5 or later is recommended.
•
The Cisco Unified Videoconferencing 3515 MCU unit IP address or a web link to the Cisco Unified
•
Videoconferencing 3515 MCU unit.
The required user name and password.
•
For first-time installation, you must assign an IP address to the Cisco Unified
Note
Videoconferencing 3515 MCU unit using a serial port connection before you can access the web
interface. For more information, see the
Procedure
Step 1
Launch your browser and enter the IP address or the name of the Cisco Unified
Videoconferencing 3515 MCU unit followed by /admin.
For example, http://125.221.23.44/admin or board_name/admin.
The Cisco Unified Videoconferencing 3515 MCU access window appears.
Step 2
Enter the Administrator user name and password in the appropriate fields and click Go. The default
global user name is admin. The default password is <null>.
The Cisco Unified Videoconferencing 3515 MCU Administrator interface appears.
Note
If you try to sign in as an Administrator and another Administrator is currently signed in, the
Cisco Unified Videoconferencing 3515 MCU signs you in as a Read only user. The words Read Only
appear at the top of the window and a pop-up displays the IP address of the Administrator already signed
in. Read only users cannot edit any of the Cisco Unified Videoconferencing 3515 MCU settings.
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU12 and MCU 24 Releases 5.6 and 5.7
2-14
Chapter 2
Setting Up Your Cisco Unified Videoconferencing 3515 MCU
"Setting the IP Address" section on page
2-5.
OL-17012-01