CABINETS TO GO Findley & Myers MBC30 Montage-instructies - Pagina 4
Blader online of download pdf Montage-instructies voor {categorie_naam} CABINETS TO GO Findley & Myers MBC30. CABINETS TO GO Findley & Myers MBC30 5 pagina's. Base microwave cabinet w/ bottom drawer
Ook voor CABINETS TO GO Findley & Myers MBC30: Montagehandleiding (8 pagina's)
Pagina afdrukken
5.
Install the D rawer Slide R ails: Insert the drawer side rail's back end (g) into the
holder (f) previously installed (Step 4) on the back panel (E) (Figure 6).
Then secure the drawer rail front end with 1/2" screws (e) using the pre‐drilled holes in the
face frame (A).
6.
Drawer Assembly (Figure 7): First
with screws (d). Then assemble the rest parts of drawer box (H) using your palm, or a rubber
mallet if needed, to secure the dove tails into position.
d
t
5
Q
y
Figure 7
7.
Installing the Corner Braces (Figure 8) and inserting the Drawers: Place the corner
braces (b) on each top corner of the cabinet and secure them with the ½" Corner Brace Screws (c).
Slide the drawers into the rail and check the drawer position. Install the rubber bumpers onto
the corners of the drawer front (G) where they contact the frame.
b
c
Q ty
4
8
Qty
a
4
Qty
E
B
F
Figure 6
assemble the drawer front (G) with drawer box front (H)
G
Figure 8
H
b
Page 4