Cisco 500 Series Gebruikershandleiding - Pagina 23

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 500 Series. Cisco 500 Series 46 pagina's. Stackable managed switches
Ook voor Cisco 500 Series: Handleiding veiligheidsinformatie (42 pagina's), Handmatig (4 pagina's), Snel aan de slag (13 pagina's), Snelstarthandleiding (21 pagina's), Gegevensblad (5 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (6 pagina's), Handmatig (40 pagina's), Administratiehandleiding (48 pagina's), Handmatig (24 pagina's), Probleemoplossing en onderhoud (15 pagina's), Snelle referentiehandleiding (7 pagina's), Snelstarthandleiding (25 pagina's)

Pagina afdrukken
Cisco 500 Series Gebruikershandleiding
Calls
Step 3
Press Call.

End a Call and Answer an Incoming Call

Procedure
Step 1
Hold Call
Step 2
Press Call once.
End a Call and Resume a Held Call
Procedure
Step 1
Hold Call
Step 2
Select the call that you want to resume.
Step 3
Press Call once.
Wireless Headsets
Cisco Headset 561 and 562 with Standard Base and Cisco Headset 561 and 562 with Multibase use similar
call controls to the wired headset models with a few important differences. The call control buttons are located
on the headset ear cup and call status feedback is provided on the Standard Base and Multibase. See the
following section for specific call control functions.
Related Topics
Turn Your Headset On and Off
Procedure
Step 1
Hold Call
Step 2
Hold Call
• You can also place the headset on its base. The headset automatically turns on and syncs to the base.
until you hear a tone.
until you hear a tone.
Cisco Headset 560
Series, on page 4
on your headset for 4 seconds. You will hear a tone indicating headset status.
for another 4 seconds to turn the headset back on.
End a Call and Answer an Incoming Call
Cisco Headset 500 Series User Guide
17