Cisco 500 Series Handmatig - Pagina 34

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 500 Series. Cisco 500 Series 40 pagina's. Stackable managed switches
Ook voor Cisco 500 Series: Handleiding veiligheidsinformatie (42 pagina's), Handmatig (4 pagina's), Snel aan de slag (13 pagina's), Snelstarthandleiding (21 pagina's), Gegevensblad (5 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (6 pagina's), Gebruikershandleiding (46 pagina's), Administratiehandleiding (48 pagina's), Handmatig (24 pagina's), Probleemoplossing en onderhoud (15 pagina's), Snelle referentiehandleiding (7 pagina's), Snelstarthandleiding (25 pagina's)

Remove a Bluetooth Headset

Step 3

Select a Bluetooth headset.

Step 4

Press Disconnect.

Remove a Bluetooth Headset

Remove your Bluetooth headset if you aren't going to use it with your phone again.

Procedure

Step 1

Press Applications

Step 2

Select Bluetooth.

Step 3

Select a Bluetooth headset and press Delete.

Set Up a Wideband Standard Headset

You can use a headset that supports wideband audio. Wideband audio improves the quality of the sound you

hear in the headset.

Procedure

Step 1

Press Applications

Step 2

Select Accessories > Analog headset > Setup.

Step 3

Press On or Off to enable or disable wideband for the analog headset.

Step 4

Press Return .

Enable Electronic Hookswitch Control on Your Phone

If your administrator has enabled Admin settings on your Cisco IP Phone, you can enable or disable electronic

hookswitch control to connect with a Cisco Headset 560 Series base. Electronic hookswitch control is enabled

by default.

Note

This feature is available on Cisco IP Phone Firmware Release 12.7(1) and later.

Procedure

Step 1

On your phone, press Applications

Headsets