Digitax F1 plus Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digitax F1 plus. Digitax F1 plus 8 pagina's. Taximeter
Ook voor Digitax F1 plus: Gebruikershandleiding (2 pagina's)

Pagina afdrukken

The taximeter has, in its front side, 5 keys (or buttons)

called: OP, K1, K2, K3, K4.

The taximeter has three working modes called:

FOR HIRE

The taximeter's

pressing the OP button in the following sequence:

For Hire

In any of the above taximeter's working mode (FOR HIRE,

HIRED, STOPPED), the other four buttons K1, K2, K3, K4

will exploit a different function, as below described.

A) Taxi in "For Hire"

When the Taxi is parked or it moves without any pas-

senger on board, the taxi driver selects the For Hire

position by OP. The clock is displayed and the keys will

have the following functions:

For Hire

Chrono Start

For Hire

Once the taxi starts the trip, the taxi driver selects the Hired

position by OP. The "Taxi" roof sign will turn off and the taxi-

meter starts the fare calculation by distance or time.

Hired

Selects Rate Nr (if inabled)

Hired

Insert Extra Nr 1 (If enabled)

Hired

Insert Extra Nr 2 (If enabled)

Hired

Reset Extras

C) Taxi in "Stopped"

At the end of the trip, the taxi driver has to select the

Stopped position by OP.

The waiting time counting is thus blocked.

Stopped

STOPPED

working modes are selectable by

Hired

Go back from Chrono to Clock

Shows calendar Day and Month

Shows Year

B) Taxi in "Hired"

Stopped

For Hire

Insert Special Extras

Insert Extra Nr 3 (If enabled)

Insert Extra Nr 4 (If enabled)

Reset Extras

HIRED

Stopped

Chrono Stop

For Hire

Stopped