Cisco Codec C Series Aan de slag handleiding - Pagina 15
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Codec C Series. Cisco Codec C Series 35 pagina's. Telepresence conference system
Ook voor Cisco Codec C Series: Aan de slag handleiding (41 pagina's), Gebruikershandleiding (44 pagina's), Aan de slag handleiding (32 pagina's), Aan de slag handleiding (42 pagina's), Aan de slag handleiding (46 pagina's)
Pagina afdrukken
Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
How to configure your system
Before you can start using your video conference system you
must set the basic configurations as described in this chapter.
You can use either the Touch controller, the remote control or
the web interface for the configuration.
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.
User interfaces
Configuration
Configuration
touch controller
First, we describe how to configure the system using
the
controller. These pages are marked with a
Touch
brown tab.
remote control and on-screen menu
Then, we describe how to configure the system if you are
using the
Remote control and on‑screen
pages are marked with a yellow tab.
Web interface
Finally, we describe how to configure the system via the
interface. These pages are marked with a green
Web
tab.
In order to use the web interface you need to know the
IP address of your system. You also have to sign in (the
default user name is admin with no password set).
Appendices
About user roles, user accounts and
passwords
The system comes with a default user account. The user
name is
admin
with no password set.
User roles: A user account must possess one or a
combination of several
exist, representing different rights: ADMIN, USER and
AUDIT. It is important to note that these roles have
overlapping
rights.
menu. These
A complete administrator user account with full access
rights, like the default
three roles.
NOTE: You need ADMIN rights to perform the system
configuration via web as described in this section.
It is highly recommended to set a password for any user
account possessing an ADMIN role.
Read more about passwords and how to create and
manage user accounts in the Administrator guide for your
product.
15
user
roles. Three user roles
non‑
admin
user, must possess all the
www.cisco.com