Cisco EX90 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco EX90. Cisco EX90 50 pagina's. Telepresence system
Ook voor Cisco EX90: Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Gebruikershandleiding (49 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (42 pagina's), Gebruikershandleiding (45 pagina's), Installatiehandleiding (6 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (7 pagina's), Handleiding voor probleemoplossing (37 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (45 pagina's), Gebruikershandleiding (37 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco EX90 Gebruikershandleiding
Cisco TelePresence System EX60 & EX90
Table of Contents
Video conferencing—calling
more than one (optional)
Video calls can consist of either just two participants
(point-to-point calls) or several participants (video
conferences).
The ability to handle calls with several participants is
an optional feature that may, or may not, be present
in your video system or your video infrastructure. If in
doubt, consult your System Administrator.
Cisco video systems offer three ways of implementing
the ability to be in a call with more than one, viz:
•
Multipoint Control Unit (MCU). This is a bridge
that interconnects calls from several sources. All
parties call the MCU unit, or the MCU unit can
also call the parties that are going to participate.
This means that all participants will be in a point-
to-point call with the MCU. If an MCU is used in
your office, consult your System Administrator for
operating details.
•
MultiSite, an optional built-in MCU in your video
system (EX90 only) that allows you to call more
than one. The video systems that you call do not
need to have any conferencing capabilities. The
maximum number of participants will be three
(yourself included) plus one audio-only call.
•
Multiway, an optional feature that transfers your
call to an external MCU as soon as you start calling
more than one. However, you do control it all
directly from your system. You will not have to call
the MCU and then do everything from there.
D1501601 User guide EX60 & EX90
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Getting started
Video meetings
Video conferencing using an external MCU (with or without Multiway)
Any limitations
to the number
of simultaneous
participants will
depend entirely on
the configuration
implemented.
Video conferencing using MultiSite (an equivalent to an embedded MCU)
The maximum
number of
simultaneous
participants is four
(yourself included)
plus one audio-only
call.
Scheduled meetings
Point-to-point
Participant 1
Participant 1
13
Managing Contacts
The Settings
Participant 2
External
MCU
Participant 3
Participant 2
Participant 3
Participants 2 and 3 experience this call as
a point-to-point call with an MCU. They will
therefore not need to have any conferencing
abilities built in.
User guide
www.cisco.com