Cisco EX90 Gebruikershandleiding - Pagina 21

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco EX90. Cisco EX90 37 pagina's. Telepresence system
Ook voor Cisco EX90: Gebruikershandleiding (50 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (49 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (42 pagina's), Gebruikershandleiding (45 pagina's), Installatiehandleiding (6 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (7 pagina's), Handleiding voor probleemoplossing (37 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (45 pagina's), Gebruikershandleiding (37 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco EX90 Gebruikershandleiding
Cisco TelePresence System EX90
Contents
Introduction
Calling another (optional feature)

Receiving calls

Tap Accept to accept the
incoming call or Reject to
reject it.
Do not disturb
The Do not disturb feature can be activated to
disable the incoming call alert signal. You may still
receive and place calls. Tap to activate—the icon will
then turn red and white. Tap again to deactivate.
D14724.03
User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Connecting the EX90
Using the EX90
Using the EX90
Calling another (optional feature)
Receiving another call while already in a call
(Optional feature)
Far end camera control
If the other end point permits it, you may control
their camera. This is known as Far end camera
control. Tap Camera.
The settings
21
Web interface
Contact us
If you already are in a call and someone
else calls you will get the following
options:
•
Accept the incoming call and join it
with the current call.
•
Accept the incoming call and put the
current call on hold.
•
Accept the incoming call and
disconnect the current call.
•
Reject the incoming call and continue
with the current call.
Pan and zoom the far end camera as needed. If
the other camera cannot be controlled, nothing
happens. Press Exit when finished.
www.cisco.com
User guide