Cisco EX90 Gebruikershandleiding - Pagina 21

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco EX90. Cisco EX90 49 pagina's. Telepresence system
Ook voor Cisco EX90: Gebruikershandleiding (50 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (42 pagina's), Gebruikershandleiding (45 pagina's), Installatiehandleiding (6 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (7 pagina's), Handleiding voor probleemoplossing (37 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (45 pagina's), Gebruikershandleiding (37 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco EX90 Gebruikershandleiding
Cisco TelePresence System EX90
Contents
Introduction

Adding participants to an ongoing call (Multiway)

Calling more than one using Multiway is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
While in a call you may add
participants provided that
your system permits to do
so.
Tap Hold to put the
ongoing call on hold...
The call will now be transferred to the Multiway
server and handled from there. This may take a
little while...
D14724.09
User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90
Using the EX90
Using the EX90
... then select, in the
usual way, whom to
add to the ongoing
call.
When everything is
ready the
Join
button
will appear. Tap this and
the bottom line will change
to read Meeting. This may take a
little while.
Since the calls have been transferred
to the Multiway server you are still in
a point-to-point call, but now with the
Multiway server as the far end. This applies
to all the other participants as well.
Scheduled meetings
21
The settings
Contact us
Once you have selected someone,
tap Start to begin including this
participant in the meeting.
Tap END to disconnect yourself.
The other participants must do
the same to disconnect from the
Multiway server.
www.cisco.com
User guide