Cisco EX90 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco EX90. Cisco EX90 7 pagina's. Telepresence system
Ook voor Cisco EX90: Gebruikershandleiding (50 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Gebruikershandleiding (49 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (42 pagina's), Gebruikershandleiding (45 pagina's), Installatiehandleiding (6 pagina's), Snelle referentiehandleiding (2 pagina's), Handleiding voor probleemoplossing (37 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (45 pagina's), Gebruikershandleiding (37 pagina's), Aan de slag handleiding (46 pagina's)

Ending a Call

To end a call, tap the End button or hang up the handset.

During a call, the touch panel displays the call control buttons.

If your system supports multisite calling, this allows you to dial

Add

additional participants.

Presentation If a device is connected to the system this allows you to share

the video output (for example to share a presentation).

This provides access to the local camera control and settings

menus.

Touch Tones This provides access to a numerical keypad to issue touch tone

commands to the far end. This is useful if you need to interact

with an auto-attendant system.

This puts the current caller on hold while you dial another

Hold

system. You can then switch between the two callers.

This ends the call.

End

Sharing a Presentation

To share a presentation from a computer or laptop, you must first connect the

device to the video conferencing system. On laptops, simply plug the cable

supplied into the laptop and use the appropriate function key to change the

display settings.

For a desktop computer system, it is possible to use the video conferencing unit

as a PC monitor. Connect the cable to the video output of your computer, then

select the appropriate monitor settings on your PC. For help doing this, please

contact a member of your local support team. The EX90 supports video

resolutions up to 1920 x 1200.

When using the system as a PC monitor the unit will automatically switch

between the PC image and the video conference when a call is made.

Tap the Presentation button. This displays your PC image on screen but

does not send it.

Tap the Present button to start sending the presentation.

You can minimise your view of the presentation by

clicking the Minimize button.

To finish your presentation, tap the Stop

Presenting button