Cisco EX90 Gebruikershandleiding - Pagina 23

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco EX90. Cisco EX90 37 pagina's. Telepresence system
Ook voor Cisco EX90: Gebruikershandleiding (50 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Gebruikershandleiding (49 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (42 pagina's), Gebruikershandleiding (45 pagina's), Installatiehandleiding (6 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (7 pagina's), Handleiding voor probleemoplossing (37 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (45 pagina's), Aan de slag handleiding (46 pagina's)

Cisco TelePresence System EX90

Setting the EX90 in standby

Outside a call, you may have the unit enter standby mode by touching the Power

button on the main unit (the screen). The Standby dialog is displayed and the unit

enters standby immediately. This does not work when you are in a call.

Outside a call, press the Power button until the Shutdown progress bar is filled

completely.

Release the button and the unit will go in shutdown in just a few seconds.

User guide EX90, November 2010.

D14724.03

Tap as shown to wake

up the system from

standby.

To start the system again,

press the Power button

until the LED illuminates

(green light).

To revert to the factory default settings, do as follows:

Disconnect the power cord.

Reconnect the power cord—a green light will illuminate shortly after.

Press the Power button as soon as the green light appears. Keep it de-

pressed for 15 seconds or so, until the green light starts flashing.

Release the button and press twice within 2 seconds. All settings will now

revert to factory default settings.

The background image on the touch screen can be changed.

Do as follows:

Draw a circle with your finger anywhere on the screen where there are no

icons.

The below image will then appear on the touch screen screen. Tap one of the

small images to use it as background image.

User guide