ACU-RITE 999143 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ACU-RITE 999143. ACU-RITE 999143 13 pagina's. Professional weather center

Pagina afdrukken

5-in-1 Sensor Installation Guidelines

INSTALLATION HEIGHT

Mount the sensor at a minimum height of 5 feet

(1.5 meters) off the ground, in an open area. Higher is better for wind

measurements- the National Weather Service recommends 33 feet

(10 meters) high!

MOUNTING OPTIONS

The included mounting bracket is designed to screw

directly onto wooden posts or surfaces that are 2"x 4" or larger. The

sensor can also be mounted directly to 3/4" steel pipe (available at

hardware stores and home centers).

SOLAR CELL INSTALLATION

Install the

sensor with the solar cell facing SOUTH.

This ensures the cell receives as much sun

as possible and orients wind direction.

5-in-1 Sensor Installation

1. Fasten mounting base (included) to a

post or pole (not included) using the 4

longer screws included in the hardware

bag.

2. Insert the mounting base into the hole

on the bottom of the sensor.

3. Make sure the arrows on the top of

the sensor are pointed in the proper

direction and the bubble level is

centered. The solar cell should be

facing south to properly orient the

wind direction.

4. Fasten the sensor into the mounting

base using the 2 shorter screws included in the hardware bag.

The 5-in-1 sensor is now ready to use.

Clear Data Collected During Installation

When installation is complete, clear erroneous data from the display unit by

pressing the "CLEAR RECORD/ RESET" button, on the back of the display

inside the battery compartment. This button will clear data recorded since

12:00 am.

Basic Setup is Complete

The 5-in-1 sensor will now synchronize with the display unit. It may take a few

minutes for synchronization to complete. If both or one of the units appear to

be functioning improperly, please refer to the troubleshooting section.

NO OBSTRUCTIONS

ABOVE OR AROUND

T H

S O U

(1.5 meters)

OPERATION

Using the Professional Weather Center

Learning Mode

Self-Calibrating Forecasting use a unique algorithm to analyze changes in

pressure over a time period (called Learning Mode) to determine your altitude.

After 14 days, the Learning Mode icon disappears from the display screen. At

this point, the self-calibrated pressure is tuned in to your location and the unit is

ready for superior weather prediction.

Weather Forecast

AcuRite's patented Self-Calibrating Forecasting provides your personal forecast

of weather conditions for the next 12 to 24 hours by collecting data from

the sensor in your backyard. It generates a forecast with pinpoint accuracy -

personalized for your exact location.

STORMY

SNOW

SNOW / RAIN

& WINDY

LIKELY

MIX LIKELY

(flashing=stormy)

View the complete list of icons at www.AcuRite.com/acurite-icons

Weather Select

Weather Select displays data including wind chill, dew point, heat index,

24-hour change in outdoor temperature and humidity, today, month and all-

time high and low records for outdoor temperature, outdoor humidity and peak

wind speed. To change the "Weather Select" category shown, press the "

button on the front of the display.

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This

weather center displays the current pressure with an arrow icon to indicate the

direction the pressure is trending (FALLING, STEADY, or RISING).

RAIN

CLOUDY

LIKELY