Cisco MX Series Aan de slag handleiding - Pagina 12
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco MX Series. Cisco MX Series 42 pagina's. Telepresence video systems
Ook voor Cisco MX Series: Aan de slag handleiding (41 pagina's), Aan de slag handleiding (33 pagina's), Aan de slag handleiding (34 pagina's), Aan de slag handleiding (46 pagina's)
Pagina afdrukken
Cisco TelePresence Video Systems
Contents
Configuration using the Touch
controller
Waking up the system
if no menu is displayed on the touch controller, tap the display
to wake up the system.
if the system does not wake up:
•
Make sure the touch controller is connected to the main unit.
•
Make sure the main unit is connected to power and switched
on.
if the system has just been switched on, wait a few minutes
to allow the system to start up.
if in doubt, read the installation guide for your product.
Back to task overview
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction
User interfaces
Confirguration
Configuration
Touch controller
12
Getting Started Guide
Appendices
Contacts
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.