Sony BRAVIA KD-55XE7096 Gebruiksaanwijzing - Pagina 4
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony BRAVIA KD-55XE7096. Sony BRAVIA KD-55XE7096 44 pagina's.
Ook voor Sony BRAVIA KD-55XE7096: Gebruiksaanwijzing (44 pagina's)
Pagina afdrukken
• Install the TV so that the TV's Table-Top Stand does not
protrudes out from the TV stand (not supplied). If the Table-Top
Stand protrudes out from the TV stand, it may cause TV set to
topple over, fall down, and cause personal injury or damage to
the TV.
• Only qualified service personnel should carry out wall-mount
installations.
• For safety reasons, it is strongly recommended that you use
Sony accessories, including:
Wall-Mount Bracket: SU-WL450
• Be sure to use the screws supplied with the Wall-Mount Bracket
when attaching the Wall-Mount Bracket to the TV set. The
supplied screws are designed as indicated by illustration when
measured from the attaching surface of the Wall-Mount Bracket.
The diameter and length of the screws differ depending on the
Wall-Mount Bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
8 mm - 12 mm
Transporting
• Before transporting the TV set, disconnect all cables.
• Two or three people are needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown below.
Do not put stress on the LCD panel and the frame around the
screen.
• When lifting or moving the TV set, hold it firmly from the
bottom.
• When transporting the TV set, do not subject it to jolts or
excessive vibration.
• When transporting the TV set for repairs or when moving, pack
it using the original carton and packing material.
4
GB
Screw (M6)
Wall-Mount Bracket
TV's rear cover
Topple prevention
KD-65XE70xx
8 mm - 12 mm
M6 screw
(previously removed)
Cord
(not supplied)
Except KD-65XE70xx
8 mm - 12 mm
Cord
(not supplied)
1.5 N·m/1,5 N·m
{15 kgf·cm}
Screw
(not supplied)
M6 screw
(not supplied)
1.5 N·m/1,5 N·m
{15 kgf·cm}
Screw
(not supplied)