Cisco Profile Series Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco Profile Series. Cisco Profile Series 7 pagina's. Jbod on the 12g sas modular raid controller
Ook voor Cisco Profile Series: Aan de slag handleiding (41 pagina's), Gebruikershandleiding (44 pagina's), Aan de slag handleiding (35 pagina's), Snelle referentiehandleiding (2 pagina's), Installatiehandleiding (44 pagina's), Configuratiehandleiding (13 pagina's), Installatieblad (2 pagina's), Installatiehandleiding (2 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (4 pagina's), Handleiding installeren (16 pagina's), Aan de slag handleiding (32 pagina's), Handmatig (16 pagina's), Aan de slag handleiding (42 pagina's), Aan de slag handleiding (46 pagina's)

During a Call

Turn Mic on/off

Adjust the

Volume

During a call it is possible to change the position of your camera. If you are in a

point to point call with a compatible system, it is also possible to more the remote

camera. This is called far end camera control.

To access the camera controls, press one of the arrow buttons. Pressing an arrow

key again will start moving the camera. In addition, a range of softkeys will be

displayed a the bottom of the screen.

Camera Softkeys

Switch to a

presentation source.

Zoom the

camera in and

out.

Displays the

layout menu

Sharing Presentation

To share a presentation



Locate the computer cable and connect the PC to the video system.

Connect the audio mini-jack output from the PC (or any other source) to

the mini-jack socket of the cable to get sound.



Press the presentation button on the remote control, the default

presentation source is activated.



If the presentation fails to show, remember that most laptops require you

to press a special key combination to switch the PC image from the PC

screen to the video screen.

If you want to send an image that is different from the default source, this can be

accomplished by selecting the presentation menu and selecting the source from

the list displayed.