Argo AWIAS19 Handleiding voor installatie-instructies - Pagina 8

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Argo AWIAS19. Argo AWIAS19 18 pagina's. Split air conditioner system

Pagina afdrukken
EN
Make the wires go through the cable-cross hole at
L
the back of the indoor unit and then pull them out
from the front side.
wire
RIGHT REAR TUBING
N
Insert refrigerant tubes and drain hose of the unit
into the hole in the wall then hang up the unit on the
rear panel previously fixed on the wall.
insulate well the hole in the wall to
NOTE:
prevent the sensors to be influenced from
the outside air
.
Open the front panel of the unit. Remove the cover
M
plate screw to reach the terminal strip.
Insert the terminals of the wire on the rear and
connect them.
LEFT REAR TUBING
O
Insert the tubes connecting the units from the
outside, then bend them right.
Push lightly to fix the unit to the rear panel.
P
8